+971 4 811 21 00
Grouting and Anchoring
Tile grouts and anchoring grouts are important part of the CCC range. Tile grouts include cementitious non shrink grout, high early strength solutions, waterproof solutions, grouts for both interior and exterior applications, anchoring grouts, high chemicals resistant grouts; both epoxy or cement based.
Corrogrout AG
Corrogrout AG is a 100% solids, thixotropic, epoxy resin anchoring grout designed to develop rapid strength gain and securely anchor tendons, bolts, dowels or bars in drilled holes in horizontal or vertical substrates.
Know MoreView Corrogrout AG TDS
Corrogrout CG
Corrogrout CG is a specially formulated Portland cement powder mix designed for the grouting of cables in pre-stressed and in post-tentioned concrete. Corrogrout CG mix design consists of a blend of fine and ultra-fine cement plus a set of synergistic admixtures. The grout has a chloride free mix design enabling the use of cable grout in contact with reinforcing steel.
Know MoreView Corrogrout CG TDS
Corrogrout CTG
Corrogrout CTG is a pre-mixed and bagged blend of cement, fine fillers & special polymers to give a coloured, polymer modified, cementitious tile grout, for joints up to 5 mm around various types of tiles. Corrogrout CTG is non metallic, free from chlorides, and available in a range colours and can be customised. Compiles to ANSI 118.6, ANSI 118.7 and ANSI 108.02.
Know MoreView Corrogrout CTG TDS
Corrogrout EP LE-M
Corrogrout EP LE-M is a 3 component, solvent free, pouring grade epoxy grout, specifically designed to develop high early and ultimate compressive strengths with low exotherm properties for heavy duty applications.
Know MoreView Corrogrout EP LE-M TDS
Corrogrout ETG
Corrogrout ETG is a 3 component, solvent free, thixotropic epoxy tile grout used for grouting joints up to 5 mm wide in various types of tiles, marble or natural stone in areas subject to high abrasion, mechanical, chemical attack or permanent immersion.
Know MoreView Corrogrout ETG TDS
Corrogrout GP
Corrogrout GP is a pre mixed & bagged blend of cements, aggregates & special polymers, to give a non-shrink, free flowing, cementitious grout, providing a smooth pouring or trowellable grade consistency that completely fills the void between base plates and foundations, for gap widths of 10 – 50 mm in a single layer of grout.
Corrogrout GP is non metallic, free from chlorides and shrinkage compensated to ensure the transfer of loads through to foundations whilst developing excellent compressive strength.
View Corrogrout GP TDS
Corrogrout HS
Corrogrout HS is a pre mixed & bagged blend of cements, aggregates & special polymers, to give a non-shrink, high strength, free flowing, cementitious grout, providing a smooth pouring or trowellable grade consistency that completely fills the void between base plates and foundations for gap widths of 10 – 50 mm in a single layer of grout. Corrogrout HS is non metallic, free from chlorides and shrinkage compensated to ensure the transfer of loads through to foundations whilst developing high early strength.
Know MoreView Corrogrout HS TDS
Corrogrout PE
Corrogrout PE is a 2 component, pouring grade, polyester resin based grout used for permanently fixing bolts, dowels and bars into pre-drilled holes in concrete, masonry, natural rock or other substrates.
Know MoreView Corrogrout PE TDS