CDM 165 – Corroplast Thin Coat
Thin coat finishing plaster on concrete or AAC blocks
Features
Corroplast Thin Coat is a cementitious premix plaster used to carry out plastering works in thin layer up to a thickness of 4 – 6 mm. Due to its high content of performance enhancing additives it has better shrinkage control and workability.
Corroplast Thin Coat can be used directly on blocks. It is durable and has good adhesion.
Uses
Corroplast Thin Coat is recommended for internal plastering on Concrete/AAC blocks, ceilings and concrete surfaces. It can be applied by hand or by using plaster-spraying machines. It should not be used on painted surfaces or floors.
Interested?
Fill out the form and we will get back to you.
Other Products
CDM 190 – Corroplast HP
Corroplast HP is a cementitious dry mix hydrophobic plaster/render consisting of portland cement, graded aggregates & special chemical additives to obtain a homogeneous mix and…
Know MoreView CDM 190 – Corroplast HP TDS
CDM 200 – Corrorock Mortar
Corrorock Mortar is a thixotrophic mortar used for creating relief structures or wall dressing and rock carvings, consisting of portland cement, graded aggregates and special…
Know MoreView CDM 200 – Corrorock Mortar TDS
CDM 460 – Corrodeco HP
Corrodeco HP is a one coat pigmented water resistant decorative render for vertical masonry and concrete walls. Corrodeco HP is a light weight product, with…
Know MoreView CDM 460 – Corrodeco HP TDS