Corroline EP SG60 – Sour Gas

Description

Solvented two component sour gas flow pipe lining

Features

  • Suitable for use for sour gas, fuel oil and aviation fuel
  • Increases gas flow rates
  • Reducas black powder build up
  • Excellent adhesion to steel
  • Withstands hydrostatic testing
  • Withstands general pigging operation
  • Excellent resistance to a wide range of hydrocarbons
  • Ease of application

Uses

Precautions

  • Do not apply when relative humidity exceeds 90%, when the surface to be coated in less than 3°C above the dew point or when the ambient or substrate temperature is less than 5°C. For best results, especially when applying material by hand, the ambient or substrate temperature should be at least 10°C.
  • To ensure coating integrity and minimum thickness, use a short bristled brush to stripe coat all welds, around bolt holes, edges and other sharp protrusions. Allow to cure until touch dry prior to carrying out the overall application of Corroline EP SG60 and do not exceed the maximum over-coating time of 48 hours.

Other Products

Corroline EP SG60 – Sour Gas

Corroline EP SG60 has been specifically designed and developed as an internal lining for sour gas pipelines. The material can reduce black powder build up and improve efficiency. Corroline EP…

Know More

Corroline PW SF100 – Solvent Free

Corroline PW SF100 has been specifically developed for the long term protection of concrete and steel drinking water pipelines, storage and processes vessels, or tanks and other water retaining structures…

Know More

Corroline EP MS50 – Sweet Gas

Corroline EP MS50 has been specifically designed and developed as an internal lining for gas pipelines that has proven to reduce black powder build up and improve flow efficiency. Corroline…

Know More