Corroline EP HT50


Solvented two component high temperature lining


  • Excellent adhesion to blast cleaned steel
  • Withstands hydrostatic testing
  • Withstands general pigging operation
  • Unaffected by aqueous solutions up to 120°C
  • Ease of application



  • Do not apply when relative humidity exceeds 90%, when the surface to be coated in less than 3°C above the dew point or when the ambient or substrate temperature is less than 7°C. For best results, especially when applying material by hand, the ambient or substrate temperature should be at least 10°C.
  • To ensure coating integrity and minimum thickness, use a short bristled brush to stripe coat all welds, around bolt holes, edges and other sharp protrusions. Allow to cure until touch dry prior to carrying out the overall application of Corroline EP HT50 and do not exceed the maximum over-coating time of 24 hours.

Other Products

Corroline EP HT50

Corroline EP HT50 is designed for use as a protective coating for steel tanks and pipework containing hot water and hot aqueous solutions. It is particularly suitable for use in…

Know More