Corroline EPA1

Description

Two component epoxy aviation fuel coating

Features

  • Resistant to aviation fuel
  • Prevents particulate build up
  • Excellent corrosion resistance
  • Thin film coating easily applied
  • Withstands general pigging operation
  • Suitable for pipelines and storage tanks
  • Resistant to all aviation fuels

Uses

Precautions

  • Do not apply when relative humidity exceeds 90%, when the surface to be coated in less than 3°C above the dew point or when the ambient or substrate temperature is less than 5°C. For best results, especially when applying material by hand, the ambient or substrate temperature should be at least 10°C.
  • To ensure coating integrity thickness, use a short bristled brush to stripe coat all welds, around bolt holes, edges and other sharp protrusions. Allow to cure until touch dry prior to carrying out the overall application of Corroline EPA1 and do not exceed the maximum over-coating time of 7 days.

Other Products

Corroline EPA1

Corroline EPA1 is a two component modified epoxy that has been specifically designed as an internal lining for pipelines and equipment subject to contact with aviation fuel and other refined…

Know More