Corroline EP SF100 – Internal & External


Solvent free two component gas flow pipe lining


  • Solvent free – no VOC’s
  • Single coat application
  • Increases gas flow rates
  • Reduces black powder build up
  • Excellent adhesion to steel and concrete
  • Withstands hydrostatic testing
  • Withstands general pigging operation
  • Excellent corrosion resistance



  • Do not apply when the relative humidity exceeds 90%, when the surface to be coated in less than 3°C above the dew point or when the ambient or substrate temperature is less than 5°C. For best results, especially when applying material by hand, the ambient or substrate temperature should be at least 10°C.
  • To ensure coating integrity and minimum thickness, use a short bristled brush to stripe coat all welds, around bolt holes, edges and other sharp protrusions. Allow to cure until touch dry prior to carrying out the overall application of Corroline EP SF100 and do not exceed the maximum over-coating time of 12 hours.

Other Products

Corroline EP SF100 – Internal & External

Corroline EP SF100 has been specifically developed as a solvent free, internal coating for gas pipelines that has proven to reduce black powder build up and improve flow efficiency. Corroline…

Know More