Acrylic based curing compound
Corrocure AR is a white liquid curing compound based on an acrylic resin emulsion that dries to form a clear, non-penetrating, continuous membrane over new concrete, preventing rapid water loss during the critical early hardening stage, thus improving the efficiency of cement hydration, increasing durability and reducing the chance of plastic shrinkage cracks.
Corrocure AR has environmental benefits, as no additional water is required to cure the concrete after application, therefore reducing subsequent labour and energy demand compared to continuously curing with water. It is also compatible with water based emulsion paints, cement renders & gypsum plasters as finishes.
Complies to ASTM C 309 Type 1 Class A / Type 2 class A .
Corrocure AR is typically used to cure fresh concrete, particularly where using traditional methods of hessian and water or polythene sheet are difficult such as high rise buildings, large surface areas or remote site locations.
Corrocure AR is beneficial in hot countries where strong sunlight and winds can dramatically increase the risk of drying shrinkage on all areas of fresh concrete.
Fill out the form and we will get back to you.
Corrocure GP is a water based, environmentally friendly general purpose curing compound with special inorganic additives. It is a completely chloride free system that chemically…Know More
View Corrocure GP TDS
Corrocure WXB is a white liquid curing compound based on a low viscosity wax emulsion that dries to form a clear, non-penetrating, continuous membrane over…Know More
View Corrocure WXB TDS