CDM 550 – CorroEIFS Base Coat
Base coat mortar for EIFS system, exterior and interior walls
Features
EPS adhesive for the following substrates:
- Exterior grade gypsum sheathing
- Glass mat gypsum sheathing
- Masonry, concrete and cement board
- EPS
- Wood
- Leveler and filler for masonry, concrete, stucco surfaces. For this application only, CorroEIFS Base Coat can be built up to 6 mm thick in a single pass.
Uses
CorroEIFS Base Coat is used as a base coat for the EIFS systems. It is also used as an adhesive to laminate EPS to listed substrates. It is an easy to use product with excellent workability. Mixing with water on site. The product is applied without the addition of cement.
Interested?
Fill out the form and we will get back to you.
Other Products
CDM 560 – CorroEIFS Finish Coat
CorroEIFS Finish Coat is a single component, cement based, ready to use decorative rendering over EIFS and other substrate. CorroEIFS Finish Coat’s fine thickness enables…
Know MoreView CDM 560 – CorroEIFS Finish Coat TDS
CDM 550 – CorroEIFS Base Coat
CorroEIFS Base Coat is used as a base coat for the EIFS systems. It is also used as an adhesive to laminate EPS to listed…
Know MoreView CDM 550 – CorroEIFS Base Coat TDS