MCT Group of Companies

Corrocrete FC

Cementitious Rendering Mortar / Fairing Coat

Product Features

Corrocrete FC is a single component, pre-mixed and bagged blend of cement, fine aggregates & special polymers, that produce a smooth mortar consistency that can be applied both horizontally or vertically at thicknesses of 0.5 – 10 mm, to fill pin holes and reprofile concrete or masonry.

Corrocrete FC is non metallic, free from chlorides and provides an excellent finish that can be painted on directly. Corrocrete FC has low permeability, providing good protection against carbon dioxide and chloride penetration.

Corrocrete FC do not contain asbestos, chromated copper arsenate and lead.

Typical Uses

Corrocrete FC is typically used as a thin render to masonry and concrete surfaces or filling of pinholes, or irregularities in concrete particularly to hide shutter lines, blow holes and other imperfections in walls, that may otherwise reflect through or inhibit the subsequent applied finishes.

Corrocrete FC is compatible with Corro range acrylic, epoxy, polyurethane or polyurea coatings.

Documents and Downloads

Technical Data Sheet Method Statement Material Safety Data Sheet

Pack Size: 25 Kg Bag
Coverage Rate: Approximately 1.3 Kg Per m² Per mm Thickness.
Color: White & Grey

Corrocrete FC

Product Features

Typical Uses

Documents and Downloads

Other Similar Products

Corrocrete MC

Corrocrete RRM

Corrocrete RM

CCC Drymix

Enquiry Form