MCT Group of Companies | Corrotech Construction Chemicals

Corrocure AR

Acrylic Based Curing Compound

Product Features

Corrocure AR is a white liquid curing compound based on an acrylic resin emulsion that dries to form a clear, non-penetrating, continuous membrane over new concrete, preventing rapid water loss during the critical early hardening stage, thus improving the efficiency of cement hydration, increasing durability and reducing the chance of plastic shrinkage cracks.

Corrocure AR has environmental benefits, as no additional water is required to cure the concrete after application, therefore reducing subsequent labour and energy demand compared to continuously curing with water. It is also compatible with water based emulsion paints, cement renders & gypsum plasters as finishes.

Corrocure AR do not contain asbestos, chromated copper arsenate and lead.

Corrocure AR complies with ASTM C 309 Type 1 Class A & Class B / Type 2 class A and BS 7542:1992.

Typical Uses

Corrocure AR is typically used to cure fresh concrete, particularly where using traditional methods of hessian and water or polythene sheet are difficult such as high rise buildings, large surface areas or remote site locations.

Corrocure AR is beneficial in hot countries where strong sunlight and winds can dramatically increase the risk of drying shrinkage on all areas of fresh concrete.

Documents and Downloads

Technical Data Sheet Method Statement Material Safety Data Sheet

Pack Size: 20 Litres and 200 Litres.
Coverage Rate: Approximately 4 - 5 m² per litre per coat
Color: Milky white

Corrocure AR

Product Features

Typical Uses

Documents and Downloads

Other Similar Products

Corrocure GP

Corrocure WXB

Corrorelease WB

Corrotech Construction Chemicals

Enquiry Form