CDM 165 – Corroplast Thin Coat

Thin coat finishing plaster on concrete or AAC blocks

Features

Corroplast Thin Coat is a cementitious premix plaster used to carry out plastering works in thin layer up to a thickness of 4 – 6 mm. Due to its high content of performance enhancing additives it has better shrinkage control and workability.

Corroplast Thin Coat can be used directly on blocks. It is durable and has good adhesion.

Uses

Corroplast Thin Coat is recommended for internal plastering on Concrete/AAC blocks, ceilings and concrete surfaces. It can be applied by hand or by using plaster-spraying machines. It should not be used on painted surfaces or floors.

View CDM 165 – Corroplast Thin Coat TDS

Interested?

Fill out the form and we will get back to you.

    Name

    Email Address

    Mobile Number

    Message

    Other Products

    CDM 180 – Corroplast HS

    Corroplast HS is a cementitious dry mix plaster/render consisting of portland cement, graded aggregates & special chemical additives to obtain a homogeneous mix and get…

    Know More
    View CDM 180 – Corroplast HS TDS
    CDM 160 – Corroplast AB

    Corroplast AB is a cementitious dry mix plaster/render consisting of portland cement, graded aggregates ,fibre & special chemical additives to obtain a homogeneous mix and…

    Know More
    View CDM 160 – Corroplast AB TDS
    CDM 165 – Corroplast Thin Coat

    Corroplast Thin Coat is a cementitious premix plaster used to carry out plastering works in thin layer up to a thickness of 4 – 6…

    Know More
    View CDM 165 – Corroplast Thin Coat TDS